Yamaha XVS950CU 2014 Service Manual page 87

1. Intake air temperature sensor sub-wire harness
2. Headlight lead
3. Headlight coupler
4. Auxiliary light lead
5. Auxiliary light coupler
6. Intake air temperature sensor coupler
7. Front brake hose
8. Throttle cables
9. Clutch cable
10. Meter assembly lead
11. Right handlebar switch lead
12. Wire harness
13. Left handlebar switch lead
A. Fasten the headlight lead and intake air
temperature sensor sub-wire harness with the
holder. Be sure to position the holder inside the
headlight assembly.
B. Fasten the intake air temperature sensor sub-wire
harness and auxiliary light lead with the holder.
C. Route the wire harness through the guide.
D. Insert the projection on the wire harness holder
into the hole in the headlight stay.
CABLE ROUTING (except for ABS models)
2-44