Yamaha XVS950CU 2014 Service Manual page 284

SWINGARM AND REAR SHOCK ABSORBER ASSEMBLIES
Pivot shaft nut
85 Nm (8.5 m·kgf, 61 ft·lbf)
4. Install:
• Rear shock absorber assembly "1"
TIP
Make sure that the slot "a" in the rear shock ab-
sorber assembly faces inward. (for models not
equipped with gas cylinders)
1
5. Tighten:
• Rear shock absorber assembly upper bolt
Rear shock absorber assembly
upper bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
6. Tighten:
• Rear shock absorber assembly lower nut
Rear shock absorber assembly
lower nut
30 Nm (3.0 m·kgf, 22 ft·lbf)
7. Adjust:
• Drive belt slack
Refer to "ADJUSTING THE DRIVE BELT
SLACK" on page 3-18.
a
4-93