Using Access Mode; Displaying The Access Files Menu - JDS Uniphase Wavetek DSAM Series Quick Start Manual

Using Access Mode

Displaying the
Access Files
Menu
DSAM Product Family Quick-Start Guide Rev. 001
Figure 34 Cable Modem Autotest Mode Screen
Each Cable Modem AutoTest is based on two types of
configuration:
– The parameters or the selected channel plan
– The parameters of the selected limit plan
After a channel plan and a limit set has been selected,
press the Start softkey and Cable Modem AutoTest
measures the signal performance of all assigned channels
in the Cable Modem Test configuration.
Use Access mode to efficiently manage your measure-
ment files and folders. You can also use Access to
synchronize your data with optional FDM utility software.
The Help system offers additional instruction about these
tasks.
To display the Access Files menu
press the Access mode key
press the Files softkey. Use the arrow keys to highlight the
task you wish to perform and press Enter.
Chapter 2 DSAM Meter Operation

Using Access Mode

(Figure 35 on page
(Figure 5 on page
48),
18), then
47