Table of Contents
Advertisement
Chapter 2 DSAM Meter Operation
Using the Keypad
Charging
Temperature
Range
Using the Keypad
16
Your DSAM charger module will not allow the charge
mode to begin if the battery temperature is not within a
safe range for charging. To begin and maintain the charge
mode, the battery temperature should be approximately
between 0° C (32° F) and 50° C (122° F). The charge
mode automatically resumes when the battery tempera-
ture returns within this range.
Below the display screen on the front panel of your DSAM
meter
(Figure 4 on page
all functions of the meter.
DSAM Product Family Quick-Start Guide Rev. 001
17) is a keypad used to perform
Advertisement
Table of Contents
Need help?
Do you have a question about the Wavetek DSAM Series and is the answer not in the manual?