Normal Engine Operation; Shut-Down Procedure - JLG 3614RS Operation & Safety Manual

Normal Engine Operation

• Observe instrument panel and display frequently to be sure all systems are
functioning properly.
• Be alert for unusual noises or vibration. When an unusual condition is noticed, park
machine in safe position and perform shut-down procedure. Report condition to your
supervisor or maintenance personnel.
• Avoid prolonged idling. If the engine is not being used, turn it off.

Shut-Down Procedure

When parking the telehandler, park in a safe location on flat level ground and away from
other equipment and/or traffic lanes.
1. Apply the park brake.
2. Shift the transmission to "Neutral. "
3. Lower forks or attachment to the ground.
4. Operate engine at low idle for 3 to 5 minutes. DO NOT over rev engine.
5. Shut off engine and remove ignition key.
6. Exit telehandler properly.
7. Turn off electrical master switch (if equipped).
8. Block wheels (if necessary).
31200938
Section 4 - Operation
4-3