Table of Contents
Advertisement
Section 7 - Lubrication and Maintenance
7.5
OPERATOR MAINTENANCE INSTRUCTIONS
Fuel System
A. Fuel Level Check
1
1. Check fuel gauge (1) located in cab.
2. If fuel is low, proceed to fuel source and perform "Shut-Down Procedure" on page 4-3.
3. Unlock and open access panel (2).
4. Turn fuel tank cap (3) to remove from filler neck.
5. Add fuel as needed.
6. Replace fuel tank cap.
7. Close and secure access panel.
Note: Replenish diesel fuel at end of each work shift to minimize condensation.
EQUIPMENT DAMAGE. Do not allow machine to run out of fuel during operation. See
Engine Operation & Maintenance Manual for details prior to servicing.
7-10
2
3
NOTICE
10
OW0970
OZ4060
31200938
OW0990
Advertisement
Table of Contents
