Adjustable Truss Boom - JLG 3614RS Operation & Safety Manual

Section 5 - Attachments & Hitches

Adjustable Truss Boom

O 4710 Z
Suspend loads in accordance with requirements set forth in Section 1- General
Safety Practices.
The joystick (1) controls movement of the boom.
The attachment tilt roller switch (2) controls truss boom tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
Installation Procedure:
• Refer to "Attachment Installation" on page 5-10.
Operation:
• Weight of rigging must be included as part of total load being lifted.
• Only use one hook to lift a load.
5-30
Use Appropriate Truss Boom Attachment Capacity Chart
To determine maximum capacity, refer to "Telehandler/Attachment/
Fork Capacity" on page 5-4.
2
O 4720 Z
1
31200938