Ignition - JLG 3614RS Operation & Safety Manual

Section 3 - Controls and Indicators

Ignition

• Position 0 - Engine off.
• Position I - Voltage available for all electrical functions.
• Position II - Wait to start engine until preheat indicator on instrument panel goes out.
• Position III - Engine start. In the event the engine does not start, rotate key to position
0 then back to position III to re-engage the starter.
• Position P - Not active, reserved for future use.
Note: Key is removable in the 0 and P positions.
3-6
0
I
P
II
III
OZ2300
31200938