Engine Cooling System - JLG 3614RS Operation & Safety Manual

Engine Cooling System

A. Engine Coolant Level Check
1. Perform "Shut-Down Procedure" on page 4-3.
2. Open engine cover.
3. Check coolant level in surge tank (1). Coolant should be between the Min and Max
(2) marks.
4. If coolant is low, allow fluid to cool.
5. Remove surge tank cap (3) slowly. Add coolant as required.
6. Replace surge tank cap.
7. Close and secure engine cover.
31200938
OZ4000
Section 7 - Lubrication and Maintenance
10
OW0970
1
3
2
OW1070
7-15