Section 6 - Emergency Procedures
6.2
EMERGENCY LOWERING OF BOOM
In the event of total loss of engine power or hydraulic pump failure with an elevated load,
the situation must be properly evaluated and dealt with on an individual basis. Contact
the local dealer for specific instructions.
Secure the telehandler using the following procedures:
1. Clear the area around telehandler of all personnel.
2. Apply the parking brake. Place the transmission in "NEUTRAL".
3. Block all four wheels.
4. Section off a large area under the boom to restrict any personnel from entering this
area.
6.3
CAB EMERGENCY EXIT
• In an emergency the rear window can be used to exit the telehandler.
• Remove the latch pin (1). The window is then free to swing open.
6-2
1
OZ0240
31200938