Park Brake; Parking Procedure - JLG 3614RS Operation & Safety Manual

Park Brake

4
1
OZ4091
The park brake lever (1) controls the application and release of the park brake.
• Pull lever back to apply park brake.
• 3614RS - Squeeze release (2) and push lever forward to release park brake.
4017RS - Lift detent ring (3) and push lever forward to release park brake.
• 3614RS - The park brake may be adjusted with the knob (4). Turn clockwise to
increase park brake force. Turn counterclockwise to decrease park brake force.
MACHINE ROLL-AWAY HAZARD. Always move park brake lever to "ON" position,
lower boom to ground and stop engine before leaving cab.
CRUSH HAZARD. Applying park brake while traveling will cause unit to stop abruptly
and could cause load loss. To stop the machine in an emergency, apply the park brake.

Parking Procedure

1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow "Shut-Down Procedure" on page 4-3.
31200938
3614RS
2
WARNING
WARNING
Section 3 - Controls and Indicators
4017RS
1
3
3-7