Anti-Theft - JLG 3614RS Operation & Safety Manual

3.3

ANTI-THEFT

Machines with the anti-theft feature active require entering a numeric code before
operation to prevent unauthorized use. Code entry is accomplished using the display and
joystick.
OZ4460
1. Turn ignition switch to position I. If anti-theft is active, the display (1) will prompt the
operator for a numeric code.
2. Use the joystick roller switch (2) to select the first digit. Push roller switch up to
increase the number; push roller switch down to decrease the number.
3. Depress and release joystick button (3) to enter the current number.
4. Continue until the code is complete.
5. If an incorrect code is entered, the display will prompt the operator again for the
numeric code.
6. If the correct code is entered, normal start up can continue.
Note: If the anti-theft feature is active and the current access code is not known, it may be
viewed in Diagnostics > Datalog Menu or changed in Operator Tools Menu (level 2 password
required for both). See Service Manual for information.
31200938
0000
1
Section 3 - Controls and Indicators
3
2
O 4470 Z
3-29