3.5
OPERATOR SEAT
Operator Presence
The operator seat (1) is equipped with an operator presence system. Engine start and
hydraulic functions are prohibited if operator is not present. If the system detects a loss of
pressure during operation, after a two second delay one of the following will occur:
1. With the park brake (2) engaged and transmission in neutral (3):
• Hydraulic controls are disabled. (Continuous Auxiliary function permitted)
• Upon returning to seated position, hydraulic controls are enabled.
2. With the park brake (2) disengaged and transmission in neutral (3):
• Hydraulic controls are disabled and buzzer sounds continuously. (Continuous
Auxiliary function permitted)
• Upon returning to seated position, hydraulic controls are enabled and buzzer will
cease.
3. With the park brake (2) disengaged and transmission in forward or reverse (3):
• Hydraulic controls are disabled, buzzer sounds continuously and transmission
shifts to neutral.
• Upon returning to seated position, hydraulic controls are enabled and buzzer will
cease. Return transmission to neutral to allow system to reset prior to reengaging
forward or reverse travel.
31200938
2
3
(IF EQUIPPED)
Section 3 - Controls and Indicators
1
3
(IF EQUIPPED)
OZ4181
3-31