Dobot M1 Pro Hardware User's Manual page 9


Dobot is not responsible for any damage caused during the transportation and
handling of equipment.
 Make sure that the robot is in the packing posture before packaging, and the brakes
on each axis are normal.

Make sure that there are no obstacles around the packing area, so that the staff can
leave in a timely manner in case of an emergency.
 When the robot is transported, the packaging needs to be fixed to ensure that the
robot is stable.
 After removing the outer packaging, make sure that the robot maintains the original
packing posture and the brakes of each axis are normal.
 During the commissioning process, make sure that no relevant personnel and
equipment (include computer used for debugging) stay in the dangerous area of the
machine.
 If necessary, wear corresponding safety protective equipment, such as safety
helmets, safety shoes (with non-slip soles), face shields, protective glasses and
gloves. Inappropriate clothing may cause personal injury.
 In order to prevent personnel from entering the working space of the robot arm by
mistake, please set up safety barriers to prevent personnel from entering the
hazardous area.
 Do not enter the working space of the manipulator at will during operating the robot,
otherwise cause injury to the robot or yourself.
 The personnel responsible for installation, operation, and maintenance of the
equipment must first undergo strict training, understand various safety precautions,
and master the correct operation and maintenance methods before operating and
maintaining the equipment.
 When an abnormality occurs in the mechanical arm, it is necessary to ensure that
the machine is stopped and then checked.
 After the commissioning of the operator is completed, the test needs to be performed
in the Manual mode first, and then it is automatically run after it is confirmed to be
correct.
 If the controller needs to be restarted due to power failure, when restarting, the robot
must be manually returned to the initial position of the automatic operation program
before restarting the automatic operation.
 Before maintenance and wiring work, the power supply must be cut off, and the
sign No power supply must be put on. Otherwise, electric shock and personal injury
may result.
 Please observe the ESD regulations when disassembling the robot or controller.
Issue V1.3 (2023-02-02)
Dobot M1 Pro Hardware User Guide
User Guide
4
Copyright © Yuejiang Technology Co., Ltd