Epever Tracer AN Series User Manual page 22

①Sealed (Default)
④ User(Apply to "MT50" and "PC software "Solar Station Monitor"）
Operating Steps
Under Battery Voltage interface, long press ENTER button enter into the interface of Battery type
setting. After choosing the battery type by pressing SELECT button, waiting for 5 seconds or
pressing ENTER button again to modify successfully.
CAUTION: The controller only can set the lead-acid battery, the lithium battery can be set
via the PC software or APP software.
Setting the battery type via the PC software or APP software
1. PC software
Step 1: Connection
Step 2: Download software
www.epever.com ——(Charge Controller—Windows)
2. APP software
Step 1:Connection
www.solarv.de
②Gel ③Flooded
19
Copyright © 2020 SolarV GmbH All rights reserved