Designations Of Controller Models; Accessories (Included) - Epever Tracer AN Series User Manual

sample distance less than 20m.
CAUTION: If the temperature sensor is short-circuited or damaged, the controller will charge
or discharge at the default temperature setting of 25 ºC.
(3) When connect the controller to external devices, only one of the ports can be used; when use
multiple controllers in parallel, the port are for cascaded use.
(4) Connect for RBVS (Remote Battery Voltage Sensor) to detect accurate battery voltage, sample
distance less than 20m.
(5) Low Voltage Disconnect Voltage(V
Low Voltage Reconnect Voltage(V
(6) Common negative design, with the same terminal of the PV and battery.

1.3 Designations of Controller Models

1.4 Accessories (Included)

Item
1 Local Temperature Sensor
2 Battery Voltage Sensor Terminal
Load control relay Terminal
3
4 Diesel generator relay Terminal
CAUTION: The above accessories are installed on the related port，please open the controller
case before checking.
www.solarv.de
) make the relay turn off;
LVD
) make the relay turn on.
LVR
Accessory Model
RT-MF58R47K3.81A
(2P-3.81mm)
2P-3.81mm
2P-3.81mm
2P-3.5mm
3
Copyright © 2020 SolarV GmbH All rights reserved
Number Picture
1Pcs
1Pcs
1Pcs
2Pcs