Important Safety Instructions
Please reserve this manual for future review. This manual contains all instructions of
safety, installation and operation of Tracer AN series controller ("the controller" is
referred in this manual).
General Safety Information
Read all the instructions and warnings carefully before installation.
No user serviceable component inside controller. DO NOT disassemble or attempt
to repair the controller.
Avoid direct sunlight, high temperatures and DO NOT install the controller at
locations where water can get in.
Install the controller at well ventilated places, the controller's heat sink will be very
hot during operation.
Installing appropriate external fuses/breakers is suggested.
Please make sure to switch off all connections of the PV array and the
fuse/breakers which close to the battery before the controller installation and
adjustment.
Power connections must remain tight to avoid excessive heating from the loose
connection.
www.solarv.de
Copyright © 2020 SolarV GmbH All rights reserved