Epever Tracer AN Series User Manual page 23

Step 2: Download software
www.epever.com——(Charge Controller (Lithium)—Android)
 Lead-acid battery parameters
The parameters are in 12V system at 25 ºC, please double the values in 24V system and quadruple
the values in 48V system.
Battery charging setting
Over Voltage Disconnect Voltage
Charging Limit Voltage
Over Voltage Reconnect Voltage
Equalize Charging Voltage
Boost Charging Voltage
Float Charging Voltage
Boost Reconnect Charging Voltage
Low Voltage Reconnect Voltage
Under Voltage Warning Reconnect
Voltage
Under Volt. Warning Volt.
Low Volt. Disconnect Volt.
Discharging Limit Voltage
Equalize Duration (min.)
Boost Duration (min.)
NOTE:
1) When the battery type is sealed, gel, flooded, the adjusting range of equalize duration is 0
to180min and boost duration is 10 to180min.
2) The following rules must be observed when modifying the parameters value in user battery type
(factory default value is the same as sealed type):
A. Over Voltage Disconnect Voltage > Charging Limit Voltage ≥ Equalize Charging Voltage ≥ Boost
Charging Voltage ≥ Float Charging Voltage > Boost Reconnect Charging Voltage.
B. Over Voltage Disconnect Voltage > Over Voltage Reconnect Voltage
C. Low Voltage Reconnect Voltage > Low Voltage Disconnect Voltage ≥ Discharging Limit Voltage.
D. Under Voltage Warning Reconnect Voltage > Under Voltage Warning Voltage ≥ Discharging
Limit Voltage.
E. Boost Reconnect Charging voltage > Low Voltage Disconnect Voltage.
CAUTION: Please refer to user guide or contact with the sales for the detail of setting
operation.

Lithium battery parameters
www.solarv.de
Sealed Gel
16.0V 16.0V
15.0V 15.0V
15.0V 15.0V
14.6V ——
14.4V 14.2V
13.8V 13.8V
13.2V 13.2V
12.6V 12.6V
12.2V 12.2V
12.0V 12.0V
11.1V 11.1V
10.6V 10.6V
120 ——
120 120
20
Copyright © 2020 SolarV GmbH All rights reserved
Flooded User
16.0V 9~17V
15.0V 9~17V
15.0V 9~17V
14.8V 9~17V
14.6V 9~17V
13.8V 9~17V
13.2V 9~17V
12.6V 9~17V
12.2V 9~17V
12.0V 9~17V
11.1V 9~17V
10.6V 9~17V
120 0~180
120 10~180