Accessories (Optional) - Epever Tracer AN Series User Manual

WARNING: The Battery Voltage Sensor Terminal and Load Control Delay Terminal should not mix, otherwise the controller may be damaged.

1.5 Accessories (optional)

Remote Temperature Sensor
(RTS300R47K3.81A)
USB to RS485 cable
CC-USB-RS485-150U
Remote Meter
MT50
WIFI Serial Adapter eBox-WIFI-01
RS485 to Bluetooth Adapter
eBox-BLE-01
Logger
eLOG01
Parallel Adapter
PAL-ADP-50AN
NOTE:① For setting and operation of accessory, please refer to accessory's user manual.
②When connect the controller to above accessories, only one of the ports can be used.
www.solarv.de
Acquisition of battery temperature for undertaking temperature compensation of control
parameters, the standard length of the cable is 3m (length can be customized). The
RTS300R47K3.81A connects to the port
NOTE: The temperature sensor short-circuited or damaged, the controller will be charged
or discharged at the default temperature 25 ºC.
USB to RS485 converter is used to monitor each controller using Solar Station PC software.
The length of cable is 1.5m. TheCC-USB-RS485-150U connects to the RS485 Port on the
controller.
MT50 can display various operating data and fault info the system. The information can be
displayed on a backlit LCD screen, the buttons are easy-to-operate, and the numeric display
is readable.
NOTE: MT50 don't support the lithium battery parameters.
After the controller is connected with the eBox-WIFI-01 through the standard Ethernet
cable (parallel cable), the operating status and related parameters of the controller can be
monitored by the mobile APP software through WIFI signals.
After the controller is connected with the eBox-BLE-01 through the standard Ethernet cable
(parallel cable), the operating status and related parameters of the controller can be
monitored by the mobile APP software through Bluetooth signals.
After the controller is connected with the eLOG-01 through the RS485 communication
cable, it can record the operating data of the controller or monitor the real-time operating
status of the controller via PC software.
Manage to work and communicate with the 2 to 6 pcs controllers in parallel.
Please refer to the user manual of parallel adapter.
4
on the controller.
❽
Copyright © 2020 SolarV GmbH All rights reserved