Epever Tracer AN Series User Manual page 15

Step 2：Remove the terminal protective cover
Step3：Connect the battery❶(Left) and PV❷(Right)
NOTE: Disconnect the system in the reverse order.
WARNING: Do not reverse the polarity of the batteries. Reverse polarity will damage the charge
controller permanently. Damage caused by reverse polarity, is not covered by warranty.
CAUTION: While wiring the controller do not turn on the breaker or fuse and make sure that
the leads of "+" and "-" poles are connected correctly.
CAUTION: A fuse which current is 1.25 to 2 times the rated current of the controller must be
installed on the battery side with a distance from the battery not greater than 150 mm.
CAUTION: If an inverter is to be connected to the system, connect the inverter directly to the
battery.
www.solarv.de
12
Copyright © 2020 SolarV GmbH All rights reserved