Table of Contents
Advertisement
SuperStorageSystem SSG-6048R-E1CR45H/L User's Manual
2-5
Rack Mounting Instructions
This section provides information on installing the chassis into a rack unit with the
rails provided. There are a variety of rack units on the market, which may mean
that the assembly procedure will differ slightly from the instructions provided. You
should also refer to the installation instructions that came with the rack unit you are
using. Note: This rail will fit a rack between 26.5" and 36.4" deep
Identifying the Sections of the Rack Rails
The chassis package includes a rack rail assembly in the rack mounting kit. Each
assembly consists of three sections: an inner chassis rail that secures directly to
the chassis, an outer rail that secures to the rack, and a middle rail which extends
from the outer rail. These assemblies are specifically designed for the left and right
side of the chassis.
Locking Tabs
Each inner rail has a locking tab. This tab locks the chassis into place when installed
and pushed fully into the rack. These tabs also lock the chassis in place when fully
extended from the rack. This prevents the server from coming completely out of
the rack when the chassis is pulled out for servicing.
Rail Assembly
(Shown with Rails
Retracted)
This Side Faces
Outward
Figure 2-1. Identifying the Different Rail Sections
Outer Rail
2-4
Middle Rail
Locking Tab
Inner Rail
Advertisement
Table of Contents
