Table of Contents
Advertisement
SuperStorageSystem SSG-6048R-E1CR45H/L User's Manual
6-8
Installing Hot-Swappable Optional NVMe Drives
The SC946LTS storage chassis supports the option for six 2.5" hot-swappable
NVMe drives in tool less hard drive carriers, which are mounted in a fixed NVMe
drive cage. The NVMe drive cage must be installed prior to removing the drives.
Once installed, the drive cage permits the NVMe drives and their carriers to be
removed without powering down the system.
Installing the NVMe Drive Cage
Installing NVMe Drive Cage
1. Power down the system and disconnect the AC power cords from the rear of
the power supplies. Open the storage chassis cover as described in Section
6-3.
2. Place the NVMe drive cage into the storage chassis as illustrated above.
3. Press the NVMe drive cage into the storage chassis until it clicks into the
locked position.
Figure 6-14. Installing the NVMe Drive Cage
6-12
2
Advertisement
Table of Contents
