Table of Contents
Advertisement
SuperStorageSystem SSG-6048R-E1CR45H/L User's Manual
Onboard Memory_Fault LED
Indicators
The memory-fault LED indicators
are located at LED_A1 - LED_H3
on the motherboard. Each memory
LED indicates the status of the DIMM
module installed on the memory slot
that carries the same name. For
example, if LED_A1 is on, it indicates
that an error has occurred to the DIMM
module installed on the P1-DIMMA1
memory slot. See the tables on the
right for more information.
5-10 SAS/SATA Ports
The 6048R-E1CR45H includes an LSI 3108 controller card in the system to support
SATA 3.0/SAS 3.0 hard drives. (RAID 0, 1, 5, 6, 10, 50 and 60 supported). The
SATA/SAS drives are hot-swappable units.
The 6048R-E1CR45L has an LSI 3008 controller card included in the system to
support SATA 3.0/SAS 3.0 hard drives. (RAID 0, 1, and 10 supported).
Note: For more information on SATA HostRAID configuration, please refer to the
Intel SATA HostRAID User's Guide posted on our website at
com..
Memory-Fault LED Indicators &
Corresponding DIMM
LED Indicator
Corresponding DIMMs
LED_A1-A3
P1DIMM_A1-A3
LED_B1-B3
P1DIMM_B1-B3
LED_C1-C3
P1DIMM_C1-C3
LED_D1-D3
P1DIMM_D1-D3
LED_E1-E3
P2DIMM_E1-E3
LED_F1-F3
P2DIMM_F1-F3
LED_G1-G3
P2DIMM_G1-G3
LED_H1-H3
P2DIMM_H1-H3
Memory-Fault LED Indicator
Color/State
Definition
Red: On
Corresponding DIMM module failed
5-22
LED State
http://www.supermicro.
Advertisement
Table of Contents
