Table of Contents
Advertisement
5-9
Onboard Indicators
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also located
on the I/O back panel. The amber LED
on the right indicates activity, while the
green LED on the left indicates the
speed of the connection. See the table
at right for more information.
BMC Heartbeat LED
A BMC (Baseboard Management
Controller) Heartbeat LED is located
at BMC_HB_LED1. When BMC_HB_
LED1 is blinking, BMC is functioning
normally. See the table at right for
more information.
Onboard Power LED
The Onboard Power LED is located
at LED2 on the motherboard. When
this LED is on, the system is on. Be
sure to turn off the system and unplug
the power cord before removing or
installing components. See the table
at right for more information.
HDD LED
An HDD LED indicator, located at
HDD_ LED1 on the motherboard,
indicates the status of onboard hard
drive disks including SATA devices.
When HDD_ LED1 is blinking, all
o n b o a r d H D D s a r e f u n c t i o n i n g
normally. See the table at right for
more information.
Chapter 5: Advanced Serverboard Setup
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color/State
Link (Left)
Green: Solid
Amber: Solid
Activity
Amber: Blinking
(Right)
BMC Heartbeat
Color/State
Green: Blinking
Onboard PWR LED Indicator
Color/State
Off
Green: On
HDD LED Indicator
Color/State
Green: Blinking
5-21
Definition
100 Mbps
1 Gbps
Active
LED States
Definition
BMC Normal
LED States
Definition
System Power Off
System Power On
States
Definition
HDDs Normal
Advertisement
Table of Contents
