Advertisement
88.
Attach Door Handle, Exterior Drop Latch and Interior Barrel
Bolt to door. Handle is positioned on top door, Drop Latch on bottom
door, and Interior Barrel Bolt (silver) on top door stud. Attach Black
Drop Latch as illustrated above with 4 - 3/4" Black Screws. Note how
female part of Drop Latch is positioned higher than male part. Do a dry
run first to position Drop Latch correctly. Important: Drill pilot holes with
1/8" drill bit prior to securing to prevent wood from splitting.
89.
Attach Horizontal Door Stop and Vertical Door Stops to
door jamb and wall framing. Use 4 - 2" screws to secure
Horizontal Stop, and 6 - 2" screws per Vertical Stop. Door
Stops should overhang the door by approximately 1/2". Start with
the Horizontal Stop first.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 49
Hardware (Step 88)
SB1 - 3/4" Black Screws
x 16 total
Y3 - Black Handle
x1
Y4 - Black Drop Latch
x1
Y5 - Silver Barrel Bolt
x1
Parts (Steps 89)
Horizontal Door Stop
(1/2" x 2 1/2" x 35 1/4") x 1
Vertical Door Stop
(1/2" x 2 1/2" x 72") x 2
Hardware (Steps 89)
S3 - 2" Screws
x 16 total
sales@outdoorlivingtoday.com
Advertisement
