Advertisement
74.
Position the Gusset Gable onto the front of the shed. Push Gable ply-
wood up tight under roof plywood and against Roof Nailing Strip. Screw
through the shingles of the Gusset Gable horizontally into the Roof Nailing
Strip with 8 - 2 1/2" screws.
Side Facia
75.
Position Rear Facia - angle cut ends tight underneath roof
shingles and tight against Nailing Strips. Temporarily position
Side Facia for a dry run to help you correctly position Rear Facia
before attaching.
Attach Rear Facia to Nailing Strips with 8 - 1 1/2" Finishing
Nails per piece. A small gap may appear where Rear Facias
come together at peak. This gap will be covered in Step 79.
Toll Free 1-888-658-1658
Rear Facia
www.outdoorlivingtoday.com
Small gap
may appear
Page 43
Parts (Steps 74)
Gusset Gable x 1
Hardware (Steps 74)
S1 - 2 1/2" Screws
x 8 total
Parts (Steps 75 - 79)
Front & Rear Facia
(3/4" x 3 1/2" x 58") x 4
Side Facia
(3/4" x 3 1/2" x 71 3/4") x 4
Hardware (Steps 75)
N1 - 1 1/2" Finishing Nails
x 16 total
sales@outdoorlivingtoday.com
Advertisement
