Download Print this page

OLT SR812-FJ-Ply Assembly Manual page 45

8x12 santa rosa shed fj bevel model with plywood roof

Advertisement

78.
Locate Horizontal Gable Trims for rear of shed.
Position equally over Gable and Wall seam. Attach each
piece with 6 - 1 1/2" Finishing Nails.
Parts (Step 78)
Horizontal Gable Trims
(1/2" x 4 1/2" x 43 1/4") x 2
Pentagon
Detail Plate
79.
Attach two Facia Detail Plates and both Pentagon Detail Plates to cover seams where Facia
pieces come together. Secure with 4 - 1 1/2" Finishing Nails per piece.
Parts (Steps 79)
Facia Detail Plates x 2
Pentagon Detail Plates x 2
Large Detail Plate x 1
Deck Post
80.
To complete porch, attach Short Deck Post and Handrail Section
together with 3 - 2" Screws. Measure 3 1/2" from bottom of post to align
rail. Place Post/Handrail section on deck. Attach rail to Porch Post with
3 - 2" Screws.
Toll Free 1-888-658-1658
Hardware (Step 78)
N1 - 1 1/2" Finishing Nails
x 6 total
Facia Detail Plate
www.outdoorlivingtoday.com
Facia Detail Plate
Large Detail
Plate
Hardware (Steps 79)
N1 - 1 1/2" Finishing Nails
Porch
Post
3 1/2"
Page 45
Pentagon
Detail Plate
x 20 total
Parts (Steps 80)
Short Deck Post
(3 1/2" x 3 1/2" x 42") x 4
Handrail Section x 1
Hardware (Steps 80)
S3 - 2" Screws
x 6 total
sales@outdoorlivingtoday.com

Advertisement

loading