Advertisement
15.
Position rear corner wall into place and attach together with
3 - 2 1/2" screws. Screw at the top, middle and bottom of 2x3
stud. Start positioning adjacent wall panels and fastening togeth-
er.
Hardware (Steps 15 - 18)
16.
Be sure to correctly position wall panels so siding overhangs your floor and wall framing is flush
with floor framing. Continue to attach walls together as per Step 15.
17.
When attaching front corner wall panel, make sure panel is nested inside the side panel. Line up
wall framing and secure at top, middle and bottom of wall studs.
Toll Free 1-888-658-1658
Do Not Attach Walls To
Floor Until Step 24.
S1 - 2 1/2" Screws
x 21 total
www.outdoorlivingtoday.com
Page 13
Optional: Caulking seams will help
prevent moisture from entering.
Caulking not included in kit.
sales@outdoorlivingtoday.com
Advertisement
