Advertisement
Recessed 1/8" and
centered on 5th rafter
51.
Identify all Roof Panels. Locate one Large Plywood Roof
Panel. Position on rear side of shed. Recess plywood back 1/8" from
end of rafter. Plywood will overhang rear of shed by 3 3/4". On oppo-
site side plywood will be centered on 5th rafter, supported by Rafter
Nailing Cleat.
52.
With Roof Plywood correctly positioned on rafters, attach with
12 - 1 1/4" screws. On 5th rafter, be sure to angle screw to hit the
meat of the rafter.
53.
Locate one Small Plywood Roof Panel and postion above
the previous piece. Postion tight against Large Roof Panel and
attach with 8 - 1 1/4" screws.
Toll Free 1-888-658-1658
3 3/4" overhang
www.outdoorlivingtoday.com
Page 31
Parts (Step 51- 55)
Roof Panel Large
(5/8" x 48" x 72") x 4
Roof Panel Small
(5/8" x 8 5/8" x 72") x 4
Hardware (Step 52)
S2 - 1 1/4" Screws
x 12 total
Hardware (Step 53)
S2 - 1 1/4" Screws
x 8 total
sales@outdoorlivingtoday.com
Advertisement
