Advertisement
42.
When Rafter Section is aligned correctly, tack Rafter Section temporarily
down from Middle Gable Wall framing into Rafter with 2 - 2" screws.
Note: Metal Ridge Board is
offset with 1st Rafter Section
43.
Place 2nd completed Rafter Section on gable wall framing. Position as per Steps 39 - 42.
Gable Notch
Rear Gable
44.
When both Rafter Sections are correctly aligned, Ridge Boards will sit in both the rear and
middle gable notches. Front Rafters will overhang Porch Posts.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 28
Hardware (Step 42)
First Ridge Board Connector
Second Ridge Board Connector
sales@outdoorlivingtoday.com
S3 - 2" Screws
x 2 total
Advertisement
