Advertisement
Side Overhangs
Front Skirting
60.
Position Porch Side Bottom Skirting on the side of the shed.
The piece on the porch section will overlap the Front Skirting. When
aligned there will be a gap on the shed side of the porch, this will be
covered by trim pieces in Step 66. Attach with 4 - 1 1/2" Finishing
Nails per piece.
61.
Position Rear Bottom Skirting - Bevel around the base of the shed. Bevel is thicker at butt and thin-
ner at top of board. Skirting will hide floor framing. Gaps on side will be covered by Narrow & Wide Trim
pieces later. Start on side walls first and attach with 4 - 1 1/2" Finishing Nails per piece.
Parts (Steps 61)
Rear Bottom Skirting- Bevel
(1/2" x 4 1/2" x 45 1/4") x 6
Toll Free 1-888-658-1658
Flush
www.outdoorlivingtoday.com
Page 36
Small Gap to be
covered by trim
Parts (Steps 60)
Porch Side Bottom Skirting
(1/2" x 4 1/2" x 44 1/2") x 2
Hardware (Steps 60)
N1 - 1 1/2"Finishing Nails
x 8 total
Skirting seam
aligned with
wall seam.
Hardware (Steps 61)
N1 - 1 1/2" Finishing Nails
x 36 total
sales@outdoorlivingtoday.com
Advertisement
