Advertisement
Toll Free 1-888-658-1658
32.
Position the Rear Gable Wall on top of the Rear Top Plate.
The rear gable framing should sit flush with the inside of the top
plate. It should also be centered sideways on the top plate. Hint:
use a straight edge to check the angle of the gable framing and
top plate. Both angles should line up. Adjust gable accordingly.
Temporarily attach to walls and Top Plate with 2 - 2" screws.
Gables may need slight adjustment in Step 46. Complete
attachment in Step 50 with additional 8 - 2" screws. Screw from
the bottom of gable framing down into Top Plate and Wall.
www.outdoorlivingtoday.com
Page 23
31.
From the outside, slide in a Rear Gable
Wall Filler Shingle to cover gable seam.
Nail down above the exposure line with 2 - 1
1/2" Shingle Nails.
Complete by attaching the short 7 1/2" top
Filler Shingle with 2 - 1 1/2" Shingle Nails.
Parts (Steps 31)
Rear Gable Filler Shingles x2
Hardware (Steps 31)
N2 - 1 1/2" Shingle Nail
x 4 total
Hardware (Steps 32)
S3 - 2" Screws
x 2 total
sales@outdoorlivingtoday.com
See Step 57 for
explanation of
exposure line.
Advertisement
