Advertisement
28.
Attach Wall Trim/Supports to wall with 3 - 2 1/2" screws per side. Try to conceal screws if possible.
Toll Free 1-888-658-1658
Hardware (Steps 28)
S1 - 2 1/2" Screws
x 6 total
29.
a small gap between the deck boards and floor
plywood. Fill this gap with the Doorway Floor
Transition Strip - angle edge cut and attach
with 4 - 1 1/2" Finishing Nails.
www.outdoorlivingtoday.com
Page 22
At the doorway of your shed there will be
Parts (Steps 29)
Doorway Floor Transition Strip
(1" x 1" x 32") x 1
Hardware (Steps 29)
N1 - 1 1/2" Finishing Nails
x 4 total
30.
Locate both Rear Gable Wall
pieces. Rear Gables have shingles
that overhang the top and bottom of
the gable frame. Screw together with
3 - 2 1/2" screws.
Parts (Steps 30)
Rear Gable Walls x2
Hardware (Steps 30)
S1 - 2 1/2" Screws
sales@outdoorlivingtoday.com
x 3 total
Advertisement
