22.
Attach remaining 15 Deck
Boards using 4 - 2" Screws per piece.
Equally space all deck boards before
attaching. Ensure screws enter the
floor joists beneath deck boards. Pre-
drill for screws at the ends of the deck
boards.
Parts (Steps 22)
Deck Boards
(1" x 5 1/2" x 44 1/2") x 15
Hardware (Steps 22)
S3 - 2" Screws
x 60 total
Toll Free 1-888-658-1658
23.
Prior to fastening walls and
installing rafters, take time to
confirm your walls are level,
square and plumb. Measure diag-
onal at top and bottom of walls
corner-to-corner. This should be
approximately 125 1/4", but more
importantly if measurements are
not within 1/4", your walls are not
square. Adjusting now will make
it easier to install roof section.
www.outdoorlivingtoday.com
Page 19
Lay all Deck Boards
down evenly spaced
prior to attaching.
PreDrill!
Check for plumb
sales@outdoorlivingtoday.com