Group Setup; Task Setup - Speco O4P25X2 User Manual

Ptz network camera

Table of Contents

Set the preset and time. The preset ranges from 001 to 360 and the dwell time is from 05s to 240s.

③ Run the current cruise. The camera will automatically keep running according to the cruise you set until new command is

received. The corresponding operating information will display on the screen when the camera is running.

④ Select STORE to save the setting.

4.4.3 Group Setup

Go to Dome FunctionGrouping Setup as below:

Go to "Edit Group" menu as shown below.

8 cruises can be set in a group. CRU 1 stands for Cruise 1, CRU 2 stands for Cruise 2 and so on. "Run Group" means to run the cruises

in order.

Go to Dome FunctionTask Setup menu as shown below:

By dividing 24 hours into several periods and appointing different commands for each period, the camera system will automatically

execute the commands according to the set time if there is no operation.

Setting Steps:

① Enable the task.

② Set the task.

Time Format: Start Time – End Time. The tasks will be automatically executed in chronological order.

Task Type: RSC, ASC, PRE, CRU, TRA.

Table of Contents