Roi Configuration; Alarm Setup; Motion Detection - Speco O4LB1 User Manual

4.2.5 ROI Configuration

Go to ImageROI Config interface as shown below. An area in the image can be set as a region of interest. This area will have a
higher bitrate than the rest of the image, resulting in better image quality for the identified area.
1. Check "Enable" and then click the "Draw Area" button.
2. Drag the mouse to set the ROI area.
3. Set the level.
4. Click the "Save" button to save the settings.

4.3 Alarm Setup

4.3.1 Motion Detection

Go to AlarmMotion Detection to set motion detection alarm.
13