Maintenance Configuration; Backup And Restore; Reboot; Upgrade - Speco O4P25X2 User Manual

Ptz network camera

Table of Contents

Please set the password level and expiration time as needed.

Password Level: Weak, Medium or Strong.

Weak level: Numbers, special characters, upper or lower case letters can be used. You can choose one of them or any combination

of them when setting the password.

Medium Level: 9~15 characters, including at least two of the following categories: numbers, special characters, upper case letters,

lower case letters.

Strong Level: 9~15 characters. Numbers, special characters, upper case letters and lower case letters must be included.

For your account security, it is recommended to set a strong password and change your password regularly.

5.8 Maintenance Configuration

Go to MaintenanceBackup & Restore.

Import & Export Settings



Configuration settings of the camera can be exported form a camera into another camera.

1. Click "Browse" to select the save path for import or export information on the PC.

2. Click the "Import Setting" or "Export Setting" button.

Default Settings



Click the "Load Default" button to restore all system settings to the default factory settings except those you want to keep.

Go to MaintenanceReboot.

Click the "Reboot" button to reboot the device.

Timed Reboot Setting:

If necessary, the camera can be set up to reboot on a time interval. Enable "Time Settings", set the date and time and then click the

"Save" button to save the settings.

Go to MaintenanceUpgrade. In this interface, the camera firmware can be updated.

Table of Contents