Ftp - Speco O4P25X2 User Manual

Sender Address: sender's e-mail address.
User name and password: sender's user name and password.
Server Address: The SMTP IP address or host name.
Select the secure connection type at the "Secure Connection" pull-down list according to what's required.
SMTP Port: The SMTP port.
Send Interval(S): The time interval of sending email. For example, if it is set to 60 seconds and multiple motion detection alarms are
triggered within 60 seconds, they will be considered as only one alarm event and only one email will be sent. If one motion alarm
event is triggered and then another motion detection alarm event is triggered after 60 seconds, two emails will be sent. When
different alarms are triggered at the same time, multiple emails will be sent separately.
Click the "Test" button to test the connection of the account.
Recipient Address: receiver's e-mail address.

5.6.10 FTP

After an FTP server is set up, captured pictures from events will be uploaded to the FTP server.
Go to Network Setup Prots/ConnectionsFTP.
Server Name: The name of the FTP server.
Server Address: The IP address or domain name of the FTP.
47