Table of Contents
Advertisement
password from your ISP.
Either method of network connection can be used. If PPPoE is used to connect internet, the camera will get a dynamic WAN IP
address. This IP address will change frequently. To be notified, the IP change notification function can be used.
Click "IP Change Notification Config" to go to the interface as shown below.
Trigger Email: when the IP address of the device is changed, the new IP address will be sent to the email address that has been set
up.
Trigger FTP: when the IP address of the device is changed, the new IP address will be sent to FTP server that has been set up.
5.6.2 Port
Go to Network SetupPort/Connections interface as shown below. HTTP port, Data port and RTSP port can be set.
HTTP Port: The default HTTP port is 80. It can be changed to any port which is not occupied.
HTTPS Port: The default HTTPs port is 443. It can be changed to any port which is not occupied.
Data Port: The default data port is 9008. Please change it as necessary.
RTSP Port: The default port is 554. Please change it as necessary.
Long Polling Port: Only some modes support this function. The port is used for a persistent connection of the third-party platform to
push smart data, like face pictures.
5.6.3 Server Configuration
This function is mainly used for connecting network video management system.
43
Advertisement
Table of Contents
