Day & Night Setup; Infrared Control; Video Format; Smart Ir Setup - Speco O4P25X2 User Manual

Ptz network camera

Hide thumbs Also See for O4P25X2:

Table of Contents

 DZoom

After enabling digital zoom mode, digital zoom will be increased on the basis of optical zoom.

 Len Initialize

After enabling "Len Initialize", the camera lens will restore to the factory default settings.

4.3.4 Day & Night Setup

Day & Night Mode includes three modes: Auto, Night, Day and Time.

 Auto：Camera will automatically switch the mode between day and night as the ambient illumination.

 Night：The camera will be night mode at all time. You'd better use this mode at night.

 Day: The camera will be day mode at all time. You'd better use this mode in daytime.

 Time: Camera will regularly switch the mode between day and night according to the set day and night time. Day & Night Mode

will be disabled if enabling this function.

 IR Sensitivity

Set the level of the IR sensitivity.

Auto, ON or OFF is optional.

PAL or NTSC is optional.

Smart IR Mode: "Auto", "Manual" or "OFF". This function can effectively avoid image overexposure so as to make the image more

realistic. The higher the level is, the more overexposure compensation will be given.

Go to Dome Function menu as shown below:

Table of Contents