Image Setup - Speco O4P25X2 User Manual

【Hue】: Set the total color degree of the image.
【Antiflicker】:
Off: disables the anti-flicker function. This is used mostly in outdoor installations.

50Hz: reduces flicker in 50Hz lighting conditions.

60Hz: reduces flicker in 60Hz lighting conditions.

【WDR】 : WDR can adjust the camera to provide a better image when there are both very bright and very dark areas simultaneously
in the field of the view by lowering the brightness of the bright area and increasing the brightness of the dark area.
 Recording will be stopped for a few seconds while the mode is changing from non-WDR to WDR mode.
【HLC】 ：lowers the brightness of the entire image by suppressing the brightness of the image's bright area and reducing the size of
the halo area.
【HLC Level】 ：Range from 00~20.
【BLC】 ：If enabled, the auto exposure will activate according to the scene so that the object of the image in the darkest area will be
seen clearly.
【Denoise】 ：Reduce the noise of the brightness and chroma of the image in low illumination condition.
【Color Level】 ：Adjust the saturation of the image.
【Defog】: Activating this function and setting an appropriate value as needed in foggy, dusty, smoggy or rainy environment to get
clear images.
【Gamma】 ：Measurement of the contrast of an image.
【VE】: Visibility enhancement.
【High Sensitivity】: Set it as needed.

4.3.2 Image Setup

Select Image Setup to go to the following sub-menu.
 AE Setup
Go to AE Setup menu as shown below:
【AE MODE】: Auto, Bright, Shutter, IRIS and Manual are optional.
【Brightness】 ： Range from 0（darkest）~20（brightness）. It is available only when bright mode is selected.
【Shutter】 ：The lower the value of camera shutter is, the brighter the image is. It is available only when the shutter or manual mode
is selected.
10