Preset Setup; Cruise Setup - Speco O4P25X2 User Manual

Ptz network camera

Table of Contents

4.4.1 Preset Setup

This function is used to memorize the specific position of pan, tilt, zoom and focus, giving much convenience for quick return to this

position by calling preset.

① Selecting the preset setup menu brings the following menu.

② Select the preset number.

③ Go to Edit CUR Preset interface as below:

④ Press iris – to switch menu mode and PTZ mode. And then set the position of the preset by clicking the direction buttons.

⑤ Set the title by clicking

button.

Save the setting.

Go to Dome FunctionCruise Setup menu as below:

In this interface, by programming presets in cruise list in advance, the system will keep calling those presets at the set time in

sequence when executing cruise command so that non-stop monitoring between multiple important positions can be achieved.

Setting steps are as follows:

① Select the cruise number.

② Edit the current cruise. This camera supports 8 cruises and 16 presets for each cruise. Go to "Edit Cur Cruise" menu as shown

below:

Table of Contents