Alarm Setup; Motion Detection - Speco O8FT1W User Manual

4.3 Alarm Setup

4.3.1 Motion Detection

Go to AlarmMotion Detection to set motion detection alarm.
1. Check "Enable" check box to activate motion-based alarms. If unchecked, the camera will not send out any signals to trigger
motion-based recording to the NVR or CMS, even if there is motion in the video.
Alarm Holding Time: it refers to the interval time between the adjacent motion detections. For instance, if the alarm holding time is
set to 20 seconds, once the camera detects a motion, it will go to alarm and would not detect any other motion in 20 seconds. If
there is another motion detected during this period, it will be considered as continuous movement; otherwise it will be considered
as a single motion.
Alarm Out: If selected, this would trigger an external relay output that is connected to the camera on detecting a motion-based
alarm.
16