Auto Pt Flip; Language Setup; Rs485 Setup; Date Setup - Speco O4P25X2 User Manual

Ptz network camera

Hide thumbs Also See for O4P25X2:

Table of Contents

4.2.1 Auto PT Flip

Select Auto PT Flip and then click

selected, please click

button to return to the menu on the left and click

return or exit to the main menu in the following settings are similar to the above-mentioned steps. The following contents will not

introduce it in details).

After you exit the main menu, press and hold

automatically flip.

English or Chinese menu can be selected.

This function is only available for some models.

Go to System SetupRS485 Setup as below:

【Dome ID】: The available range is from 001 to 255.

【Protocol】: PELCO-D or PELCO-P is selectable.

【Baud Rate】: The baud rate is selectable from 1200 to 9600bps.

Go to System SetupDate Setup menu as shown below:

①

Set the date and time by clicking the direction button.

②

Select STORE to save the setting.

to set up the menu on the right; click

button to let the speed dome move to the bottom. Then the dome will

button to select On/Off. If "On" is

button to select Exit. (The ways to go to sub-menu,

Table of Contents