Zoom/Focus; Alarm Setup; Motion Detection - Speco O4BDD2M User Manual

4.2.6 Zoom/Focus

This function is only available for the model with motorized zoom lens. Within this section, zoom and focus can be controlled. If
the image is out of focus after a manual adjustment, one key focus can be used to set the focus automatically.

4.3 Alarm Setup

4.3.1 Motion Detection

Go to AlarmMotion Detection to set motion detection alarm.
1. Check "Enable" check box to activate motion-based alarms. If unchecked, the camera will not send out any signals to trigger
motion-based recording to the NVR or CMS, even if there is motion in the video.
Alarm Out: If selected, this would trigger an external relay output that is connected to the camera on detecting a motion-based
alarm.
Trigger Audio Alarm: If selected, the warning voice will be uttered on detecting a motion based alarm. (Please set the warning voice
first. See Audio Alarm for details).
Trigger SD Card Snapshot: If selected, the system will capture images on motion detection and save the images on an SD card.
Trigger SD Card Recording: If selected, video will be recorded on an SD card on motion detection.
Trigger Email: If "Trigger Email" and "Attach Picture" are checked (email address must be set first in the Email configuration
16