Power On Control; Usb - Strong SRT 3032 Manual

Update Type User: With this function you can re-install a previously made back-up file with Dump. The
settings and channel list(s) you have created before, can quickly be re-installed after for example a software
upgrade.
At Upgrade Type select USB Update.
At Section select User
At File Path press OK.
A popup screen will show, if applicable, select the partition (USB (C:) is default) where the file is stored. The
root folder is now shown in the popup, and then select the correct update file. (Default name dump_all.bin).
Then press OK, the file will be selected for upgrade. Go to Start and press OK. A progress banner will now be
displayed, running up to full Yellow. The receiver will reboot and come back up with the first channel in the
list.
NOTE: Other functions in the Software Upgrade menu are for factory use only.

7.6.2 Power On Control

Select how the unit should react after inserting the main power.
Power On will let the unit come up in Running mode.
Standby will let the unit come up in Standby mode.
Last state will let the unit come up in the mode in which power was removed, either Running mode or
Standby mode.

7.7 USB

The USB menu contains the Media Centre, simple media player feature. The USB menu can be reached from
viewing mode with the GREEN Media} button on the RCU as shortcut.
Media Centre
File
Video
Music
Picture
This is a simple media player feature, which can show or play a File, Video, Music or
Picture file. Only supported file types can be played. Select the partition on your USB
device where the file is and select a file to be played. During play, you can press [OK]
and bring up a progress banner, and then use the pqtu buttons to select special
functions in the screen. Also, the buttons on the RCU perform functions such as
pause and play u 2, 3, previous file 5 and 6 file. For video files extra options come
available: fast reverse 8 and fast forward 8. With the 7 and 8 buttons you can
rewind or forward playback in x2, x4, x8, x16 and x32 speed when pressed repeatedly.
While playing a video file, use OK, then tu (short or long press) to jump quickly
through the video file. Press OK to continue watching on the new point in the video.
An overview of all content from you connected USB device. All supported file types
can be played from here, whether they are Video, Music or{Picture. Select File and
press OK.
Select Video if you are specifically looking for video files stored on the USB device.
Press SUBTITLE or SUB during video play mode to see options about subtitles, if
available. These can either be Inside which are embedded in the video or Outside
with accompanied subtitles files in the .srt format. These must have exactly the same
name as the video file and be located in the same folder as the video file.
Select Music if you are specifically looking for audio files stored on the USB device.
Select Picture if you are specifically looking for picture files stored on the USB device.
19