Rear Panel; Remote Control - Strong SRT 7040 Manual

2.3 Rear panel

1. SAT IN
2. HDMI
3. TV SCART
4. Audio L/R
5. S/PDIF coaxial
6. Power connector

2.4 Remote Control

7040
To connect to the LNB of your satellite dish for reception of satellite broadcast
signal
To connect to the HDMI input of your TV using a good quality HDMI cable
To connect to TV using a SCART cable
To connect to an analogue amplifier for stereo audio
To connect to a digital or home cinema audio amplifier
The receiver requires a wall adapter, mains voltage input 100~240V AC 50~60Hz
12V, 1.5A DC output. Please check the local power conditions before connecting
the receiver to the mains supply.
8
Fig. 2
Fig. 3