Pto & Pto Shield Guard; Pto & Pto Shield Guard; Installing Pto Shaft; Installing Pto Shaft - Kioti DK4810 Manual

6
 dk4810(h,hs) / dk5310(h,hs) / dk5810(h,hs)
-
PTO & PTO sHIELD guARD
(1) pto shaft cover
(2) pto shaft cap
sPECIfICATION
Nominal
PTO type
diameter
1 35
PTO sheild guard
TD210-호주향-DK4810,5310,5810(HS)-08 8
before you install the some kind of
implement, take off pto shaft cap(2)
and install the universal joint of im-
plement.
if necessary, fold up the pto shield
guard (1).
S43O120b
Number and Nominal PTO
type rated rotational
of splines frequency
540
6 straight
splines
1,000
Category
t1 compliance with iso 500-1

INsTALLINg PTO sHAfT

(1) universal joint
1. consult your local kIOTI dealer for
Recommended PTO
2. when selecting a universal joint,
power at rated engine
speed(kw)
up to 60
up to 92
Regulation
3. move the joint back and forth to
H11O682A
selection of the universal joint.
make sure that it is not too short to
come off of the female and male
shafts at the highest position or too
long to impact its female and mail
shafts at the lowest position.
check that its lock pin is properly
seated to the groove of the pto
shaft.
2018-09-07 오전 10:37:13