Installing Pto Shaft; Installing Pto Shaft - Kioti RX6010C Manual

INsTALLINg PTO sHAfT

(1) pto shaft
1. consult your local KIOTI dealer
for selection of the pto shaft.
2. when selecting a pto shaft,
make sure that it is not too short to
come off of the female and male
shafts at the highest position or too
long to impact its female and male
shafts at the lowest position.
3. move the joint back and forth to
check that its lock pin is properly
seated to the groove of the pto
shaft.
M55-유럽판-06.indd 9
H11O682A
(1) Lock pin
3-poInt HItcH ImpLement And LoAdeR opeRAtIon
Make sure that the PTO safety

cover is in its position before
driving the PTO shaft.
The tractor PTO and PTO shaft
1 1

should not be interfered by
any surrounding parts.
Never go close to the rotating

PTO or tractor PTO shaft. A se-
vere accident can happen.
C56O140A
Before driving an implement

through the PTO, always make
sure that all bystanders are
well away from the tractor.
when using the PTO drive with

a stationary tractor, always
make sure that the gears are
in neutral and that the parking
brake is applied.
T66O122A
6

-
wARNINg
6
2011-08-11 오후 3:47:47