INsTALLINg PTO sHAfT
(1) universal joint
1. consult your local kIOTI dealer for
selection of the universal joint.
2. when selecting a universal joint,
make sure that it is not too short to
come off of the female and male
shafts at the highest position or too
long to impact its female and mail
shafts at the lowest position.
3. move the joint back and forth to
check that its lock pin is properly
seated to the groove of the pto
shaft.
TD210-EEC인증용-DK6010H,DK6010C,DK611 11
H11O682A
(1) lock pin
3-point hitch implement And loAder operAtion
Make sure that the PTO safety
•
cover is in its position before
driving the PTO shaft.
Never go close to the rotating
1 1
•
PTO or tractor PTO shaft. A
severe accident can happen.
before driving an implement
•
through the PTO, always make
C56O140A
sure that all bystanders are
well away from the tractor.
when using the PTO drive
•
with a stationary tractor, al-
ways make sure that the gears
are in neutral and that the
parking brake is applied.
The tractor PTO and PTO shaft
•
should not be interfered by
any surrounding parts.
t66O122A
6
11
-
wARNINg
5 6
2018-04-20 오후 1:28:17